engine cooling system

1. As a result, there is a greater chance of overheat in case something goes wrong in the engine cooling system.
   作为一个结果，有一个更大的机会过热在出差错的情况下在发动机冷却系统。
2. This is to free the air bubbles from the car engine cooling system.
   这是自由的空气泡从汽车发动机冷却系统。
3. This is one reason why car manufacturers provide a valve to throw the air away from the car engine cooling system.
   这是原因之一，汽车制造商提供一个阀门，把空气离开汽车发动机冷却系统。
4. If there happens to be air bubbles in their engine cooling system, it may cause their cars to malfunction.
   如果刚好气泡在发动机冷却系统，这可能会引起他们的汽车故障。
5. Intelligence Control of Thermostat in Automotive Engine Cooling System
   汽车发动机冷却系统节温器的智能控制
6. Simple as it can be, air bubbles may actually turn out to be dangerous. Overtime, they may cause overheat when trapped in car engine cooling system.
   简单的，因为它可以，气泡实际上可能会是危险的。加班，他们可能导致过热当困在汽车发动机冷却系统。
7. Test and Control Test-bed Research of Engine Cooling System Based on Virtual Instrument
   基于虚拟仪器的发动机冷却系统测控试验台
8. Analysis of High Temperature of Mechanically Refrigerated Train Diesel Engine Cooling System and Fault Debugging Measures
   机保车柴油机机体温度过高的故障原因分析及排除方法（发动机）机油温度表
9. Research on Simulation of Fueled with Different Fuels of Diesel Engine Cooling System
   柴油机改用不同燃料的冷却系统的仿真研究
10. Bleed the engine cooling system.
    为发动机冷却系统放气。
11. The engine cooling system cool to the engine alone, it adopts hydraulic to drive the cooling fan, and the rotational speed of fan and water pump is controlled by the overflow of the electromagnetic proportion valve.
    发动机冷却系统采用液力方式驱动冷却风扇，它单独对发动机进行冷却，风扇和水泵转速由电磁比例溢流阀来调节。
12. A Study on The Anti-Corrosion of Multi-Metal in The Car Engine Cooling System
    关于汽车发动机冷却系统中多种金属的防腐蚀研究
13. Numerical Simulation on Design of a Tubular Radiator in Automotive Engine Cooling System
    管片式散热器在汽车发动机冷却系匹配设计中的数值模拟
14. A mathematical model describing the dynamic performance of vehicle engine cooling system is established and computed in MATLAB/ SIMULINK in this paper.
    本文建立了汽车发动机冷却系统的动态特性仿真模型，并在MATLAB/SIMULINK中对模型进行仿真计算。
15. APF Type Electronically Controlled Engine Cooling System
    APF型发动机电子控制冷却系统
16. This thesis has divided the original cooling system of the engineering machinery into two independent cooling systems: the engine cooling system and hydraulic oil cooling system, the two cooling systems are controlled by the one-chip compute control system.
    本文将工程机械原冷却系统分成了发动机冷却系统和液压油冷却系统两个独立的系统，由单片机控制系统对它们进行控制。
17. The Intelligent Control of Auto Engine Cooling System
    汽车发动机冷却系统的智能控制
18. Study of Performance Test for Auto Engine Cooling System
    汽车发动机冷却系性能试验研究
19. Coupled Analysis of Automotive Air Conditioning System and Engine Cooling System
    汽车空调系统与发动机冷却系统的耦合分析
20. With CD40 lubricating oil as work medium, under the engine cooling system work conditions, 21 geometrical schemes of stainless steel offset strip fins were studied.
    采用CD40柴油机油为工作介质，在发动机冷却系统实际工况下，对21种几何尺寸的错列锯齿型不锈钢翅片进行了研究。
21. Make use of the software, combined with the procedures for the preparation of VB: establishes a situational model of engine cooling system, which mainly includes temperature saver model, the radiator and cooling water pump model.
    借助该软件，结合VB编写的程序，建立了发动机冷却系统的仿真模型，其中主要包括节温器模型、散热器模型和冷却水泵模型。
22. Considering the TEG influence on the engine cooling system, the thesis has optimized the water tank capacity from the point of thinning the thickness of the water tank and its processing manufacturability.
    另外，为减轻TEG对发动机冷却性能的影响，从减薄水箱厚度着手，兼顾水箱的加工工艺性，对水箱容量进行了一定优化。
23. During the analyse of fan selection and matching, this article brought out main requirements of fan selection and confirming of fan performance parameters, and an AUDI fan was used as a example to explain how to estimate fan performance by its matching with engine cooling system.
    在风扇选型与匹配的分析中，研究了风扇选型的总体要求和风扇基本性能参数的确定，并且以一款AUDI风扇为例，论述了如何通过风扇与冷却系统的匹配来评价风扇性能的优劣。
24. The centrifugal force air through the structure of the heat sink parameter, the cooling air system and its subsidiary bodies adjust the experimental data before and after contrast, concluded a universal approach to design the engine cooling system and method.
    本研究通过对离心式强制风冷结构的散热片参数、冷却风系统以及其附属机构调整前后的实验数据对比，总结出通用发动机冷却系统的设计方式和方法。
25. Automotive engine cooling system is the key factor of affecting engine efficiency and safety.
    汽车发动机冷却系统是影响发动机效率和安全性的关键因素之一。
26. Radiator module is an essential part of the engine cooling system. The cooling effect of the engine and vehicle is, in a large part, decided by the performance of the radiator module.
    散热器模块是发动机冷却系统中的重要组成部分，其工作性能在很大程度上决定了发动机及车辆的散热效果。
27. With the improvement of performance and compact structure for the engine in large power heavy-duty vehicles, thermal load and mechanical load of cooling system are increasing in general, which is a serious challenge for the matching and layout of engine cooling system.
    对于大功率重型汽车，随着发动机性能的不断强化和结构的日益紧凑，其热负荷和机械负荷普遍提高，因此对发动机冷却系统的设计匹配和总体布置提出了更高的要求。
28. Engine cooling fan is an important component of engine cooling system.
    发动机冷却风扇是车辆冷却系统的重要组成部分。
29. So the efficiency and performance of fan is very important for the AC system and the Engine cooling system.
    因此风机的效率与性能的研究显得尤为重要。

noun

1. equipment in a motor vehicle that cools the engine

   Synonym:    cooling system